Breakthrough electroneutron multi-response miniature dosimetry/spectrometry in medical accelerator.

Breakthrough multi-response miniature dosimetry/spectrometry of electroneutrons (EN) was made on surface and in-depths of whole-body polyethylene phantom under 10 cm × 10 cm electron beam of 20 MV Varian Clinac 2100C electron medical accelerator commonly applied for prostate treatment. While dosimetry/spectrometry of photoneutrons (PN) has been well characterized for decades, those of ENs lagged behind due to very low EN reaction cross section and lack of sensitive neutron dosimeters/spectrometers meeting neutron dosimetry requirements. Recently, Sohrabi "miniature neutron dosimeter/spectrometer" and "Stripe polycarbonate dosimeter" have broken this barrier and determined seven EN ambient dose equivalent (ENDE) (µSv.Gy-1) responses from electron beam and from albedo ENs including beam thermal (21 ± 2.63), albedo thermal (43 ± 3.70), total thermal (64 ± 6.33), total epithermal (32 ± 3.90), total fast (112.00), total thermal + epithermal (l96 ± 10), and total thermal + epithermal + fast (208 ± 10.23) ENs. Having seven ENDE responses of this study and seven PNDE responses of previous study with the same accelerator obtained at identical conditions by the same principle author provided the opportunity to compare the two sets of responses. The PNDE (µSv.Gy-1) responses have comparatively higher values and 22.60 times at isocenter which provide for the first time breakthrough ENDE responses not yet reported in any studies before worldwide.

Hidden Negative Issues and Possible Solutions for Advancing the Development of High-Energy-Density in Lithium Batteries: A Review.

This review article discusses the hidden or often overlooked negative issues of large-capacity cathodes, high-voltage systems, concentrated electrolytes, and reversible lithium metal electrodes in high-energy-density lithium batteries and provides some feasible solutions that can realize the construction of realistic rechargeable batteries with higher energy densities. Similar objective discussion of the negative aspects of lithium-air batteries, multi-valent shuttles, anion shuttles, sulfur cathode systems, and all-solid ceramic batteries can help fabricate more realistic batteries.

Interface Modifications of Lithium Metal Anodes for Lithium Metal Batteries.

Lithium metal batteries (LMBs) enable much higher energy density than lithium-ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which have been hindering LMBs from commercialization. To this end, numerous efforts have been invested to understand the underlying mechanisms theoretically and experimentally and to develop technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMB cells. We expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.

Electropolymerization of Donor-Acceptor Conjugated Polymer for Efficient Dual-Ion Storage.

Rationally designed organic redox-active materials have attracted numerous interests due to their excellent electrochemical performance and reasonable sustainability. However, they often suffer from poor cycling stability, intrinsic low operating potential, and poor rate performance. Herein, a novel Donor-Acceptor (D-A) bipolar polymer with n-type pyrene-4,5,9,10-tetraone unit storing Li cations and p-type carbazole unit which attracts anions and provides polymerization sites is employed as a cathode for lithium-ion batteries through in situ electropolymerization. The multiple redox reactions and boosted kinetics by the D-A structure lead to excellent electrochemical performance of a high discharge capacity of 202 mA h g-1 at 200 mA g-1, impressive working potential (2.87 and 4.15 V), an outstanding rate capability of 119 mA h g-1 at 10 A g-1 and a noteworthy energy density up to 554 Wh kg-1. This strategy has significant implications for the molecule design of bipolar organic cathode for high cycling stability and high energy density.

Smart Solid-State Interphases Enable High-Safety and High-Energy Practical Lithium Batteries.

With the electrochemical performance of batteries approaching the bottleneck gradually, it is increasingly urgent to solve the safety issue. Herein, all-in-one strategy is ingeniously developed to design smart, safe, and simple (3S) practical pouch-type LiNi0.8Co0.1Mn0.1O2||Graphite@SiO (NCM811||Gr@SiO) cell, taking full advantage of liquid and solid-state electrolytes. Even under the harsh thermal abuse and high voltage condition (100 °C, 3-4.5 V), the pouch-type 3S NCM811||Gr@SiO cell can present superior capacity retention of 84.6% after 250 cycles (based pouch cell: 47.8% after 250 cycles). More surprisingly, the designed 3S NCM811||Gr@SiO cell can efficiently improve self-generated heat T1 by 45 °C, increase TR triggering temperature T2 by 40 °C, and decrease the TR highest T3 by 118 °C. These superior electrochemical and safety performances of practical 3S pouch-type cells are attributed to the robust and stable anion-induced electrode-electrolyte interphases and local solid-state electrolyte protection layer. All the fundamental findings break the conventional battery design guidelines and open up a new direction to develop practical high-performance batteries.

Ultra-highly stiff and tough shape memory polyurea with unprecedentedenergy density by precise slight cross-linking.

Shape memory polymers (SMPs) have attracted significant attention and hold vast potential for diverse applications. Nevertheless, conventional SMPs suffer from notable shortcomings in terms of mechanical properties, environmental stability, and energy density, significantly constraining their practical utility. Here, inspired by the structure of muscle fibers, we report an innovative approach that involves the precise incorporation of subtle, permanent cross-linking within a hierarchical hydrogen bonding supramolecular network. This novel strategy has culminated in the development of covalent and supramolecular shape memory polyurea (CSSMP), which exhibits exceptional mechanical properties, including high stiffness (1347 MPa), strength (82.4 MPa), and toughness (312.7 MJ m-3), ensuring its suitability for a wide range of applications. Furthermore, it boasts remarkable recyclability and repairability, along with excellent resistance to moisture, heat, and solvents. Moreover, the polymer demonstrates outstanding shape memory effects characterized by a high energy density (24.5 MJ m-3), facilitated by the formation of strain-induced oriented nanostructures that can store substantial amounts of entropic energy. Simultaneously, it maintains a remarkable 96% shape fixity and 99% shape recovery. This delicate interplay of covalent and supramolecular bonds opens up a promising pathway to the creation of high-performance SMPs, expanding their applicability across various domains. This article is protected by copyright. All rights reserved.

Bilateral intertrochanteric fractures in an elderly patient following high-energy trauma: a case report.

BACKGROUND: Cases of bilateral hip fractures are rare, and even more so are cases of bilateral intertrochanteric fractures. Common causes include trauma, internal diseases, and primary or secondary bone diseases. We report a case of bilateral intertrochanteric fractures in an elderly patient following a severe car accident, a scenario not extensively reported in existing literature. CASE PRESENTATION: We report on an 84-year-old male who suffered severe trauma from a car accident, resulting in multiple injuries and shock state, with pain and limited mobility in both hip joints. After examination and imaging studies, the patient was diagnosed with multiple injuries and bilateral intertrochanteric fractures. Following emergency resuscitation, he was admitted to the orthopedic ward. A pre-surgical multidisciplinary team (MDT) consultation was convened to optimize surgical conditions. The patient underwent successful one-stage bilateral intramedullary nailing. The patient was assisted to stand with a walker on the third day after surgery. Six months post-surgery, the patient resumed outdoor activities. CONCLUSION: Managing bilateral intertrochanteric fractures, particularly in the elderly with severe trauma, is notably challenging due to their rarity. However, a coordinated multidisciplinary approach and one-stage bilateral internal fixation can lead to effective treatment outcomes and favorable prognoses.

Double Nitrogenation Layer Formed Using Nitric Oxide for Enhancing Li+ Storage Performance, Cycling Stability, and Safety of Si Electrodes.

To enhance Li storage properties, nitrogenation methods are developed for Si anodes. First, melamine, urea, and nitric oxide (NO) precursors are used to nitrogenize carbon-coated Si particles. The properties of the obtained particles are compared. It is found that the NO process can maximize the graphitic nitrogen (N) content and electronic conductivity of a sample. In addition, optimized N functional groups and O─C species on the electrode surface increase electrolyte wettability. However, with a carbon barrier layer, NO hardly nitrogenizes the Si cores. Therefore, bare Si particles are reacted with NO. Core-shell Si@amorphous SiNx particles are produced using a facile and scalable NO treatment route. The effects of the NO reaction time on the physicochemical properties and charge-discharge performance of the obtained materials are systematically examined. Finally, the Si@SiNx particles are coated with N-doped carbon. Superior capacities of 2435 and 1280 mAh g-1 are achieved at 0.2 and 5 A g-1, respectively. After 300 cycles, 90% of the initial capacity is retained. In addition, differential scanning calorimetry data indicate that the multiple nitrogenation layers formed by NO significantly suppress electrode exothermic reactions during thermal runaway.

Self-Catalyzed Growth of Co4N and N-Doped Carbon Nanotubes toward Bifunctional Cathode for Highly Safe and Flexible Li-Air Batteries.

The practical application of high-energy density lithium-oxygen (Li-O2) batteries is severely impeded by the notorious cycling stability and safety, which mainly comes from slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at cathodes, causing inferior redox overpotentials and reactive lithium metal in flammable liquid electrolyte. Herein, a bifunctional electrode, a safe gel polymer electrolyte (GPE), and a robust lithium anode are proposed to alleviate above problems. The bifunctional electrode is composed of N-doped carbon nanotubes (N-CNTs) and Co4N by in situ chemical vapor deposition self-catalyzed growth on carbon cloth (N-CNTs@Co4N@CC). The self-supporting, binder-free N-CNTs@Co4N@CC electrode has a strong and stable three-dimensional (3D) interconnected conductive structure, which provides interconnectivity between the active sites and the electrode to promote the transfer of electrons. Furthermore, the N-CNT-intertwined Co4N ensures efficient catalytic activity. Hence, the electrode demonstrates improved electrochemical properties even under a large current density (2000 mA g-1) and long cycling operation (250 cycles). Moreover, a highly safe and flexible rechargeable cell using the 3D N-CNTs@Co4N@CC electrode, GPE, and robust lithium anode design has been explored. The open circuit voltage is stable at ∼3.0 V even after 9800 cycles, which proves the mechanical durability of the integrated GPE cell. The stable cable-type Li-air battery was demonstrated to stably drive the light-emitting diodes (LEDs), highlighting the reliability for practical use.

Tuning Green Explosives through SNAr Chemistry.

Reactivity and regioselectivity of SNAr-type fluorine substitution with azide in polyfluoronitrobenzenes was studied both theoretically and experimentally. The obtained polyazidonitrobenzene derivatives were extensively characterized by NMR, IR, HPLC, X-ray, and DFT methods. It was found that the substitution with the azide nucleophile occurs first at the para- and the ortho-positions to the NO2-group and that transazidation reactions also occur here. Thermal decomposition of prepared azidonitrobenzenes was studied both in controlled (kinetic decay) and uncontrolled (explosion) modes. In case of the controlled thermal decomposition of ortho-azidonitrobenzenes, benzofuroxans were found as major products of the reaction unless another azido group was adjacent to the furoxan moiety. The bursting power of azidonitrobenzenes was found to rise gradually with the number of the azide substituents in the aromatic ring.

Enhancing the Weld Quality of Polylactic Acid Biomedical Materials Using Rotary Friction Welding.

Polylactic acid (PLA) stands out as a biomaterial with immense potential, primarily owing to its innate biodegradability. Conventional methods for manufacturing PLA encompass injection molding or additive manufacturing (AM). Yet, the fabrication of sizable medical devices often necessitates fragmenting them into multiple components for printing, subsequently requiring reassembly to accommodate the constraints posed by the dimensions of the AM platform. Typically, laboratories resort to employing nuts and bolts for the assembly of printed components into expansive medical devices. Nonetheless, this conventional approach of jointing is susceptible to the inherent risk of bolts and nuts loosening or dislodging amid the reciprocating movements inherent to sizable medical apparatus. Hence, investigation into the joining techniques for integrating printed components into expansive medical devices has emerged as a critical focal point within the realm of research. The main objective is to enhance the joint strength of PLA polymer rods using rotary friction welding (RFW). The mean bending strength of welded components, fabricated under seven distinct rotational speeds, surpasses that of the underlying PLA substrate material. The average bending strength improvement rate of welding parts fabricated by RFW with three-stage transformation to 4000 rpm is about 41.94% compared with the average bending strength of PLA base material. The average surface hardness of the weld interface is about 1.25 to 3.80% higher than the average surface hardness of the PLA base material. The average surface hardness of the weld interface performed by RFW with variable rotational speed is higher than the average surface hardness of the weld interface performed at a fixed rotating friction speed. The temperature rise rate and maximum temperature recorded during RFW in the X-axis of the CNC turning machine at the outer edge of the welding part surpassed those observed in the internal temperature of the welding part. Remarkably, the proposed method in this study complies with the Sustainable Development Goals due to its high energy efficiency and low environmental pollution.

Pyroelectric Photoconductive Diode for Highly Sensitive and Fast DUV Detection.

Detecting high-energy photons from the deep ultraviolet (DUV) to X-rays is vital in security, medicine, industry, and science. Wide bandgap (WBG) semiconductors exhibit great potential for detecting high-energy photons. However, the implementation of highly sensitive and high-speed detectors based on WBG semiconductors has been a huge challenge due to the inevitable deep level traps and the lack of appropriate device structure engineering. Here, a sensitive and fast pyroelectric photoconductive diode (PPD), which couples the interface pyroelectric effect with the photoconductive effect based on tailored polycrystal Ga-rich GaOx (PGR-GaOx) Schottky photodiode, is first proposed. The PPD device exhibits ultrahigh detection performance for DUV and X-ray light. The responsivity for DUV light and sensitivity for X-ray are up to 104 A W-1 and 105 µC Gyair -1 cm-2, respectively. Especially, the interface pyroelectric effect induced by polar symmetry in the depletion region of the PGR-GaOx can significantly improve the response speed of the device by 105 times. Furthermore, the potential of the device is demonstrated for imaging enhancement systems with low power consumption and high sensitivity. This work fully excavates the potential of the pyroelectric effect for detectors and provides a novel design strategy to achieve sensitive and high-speed detectors.

Unveiling the language of scars: A patient-centric themed framework for comprehensive scar morphology.

BACKGROUND: Scarring, a pervasive issue spanning across medical disciplines, lacks a comprehensive terminology for effective communication, patient engagement, and outcome assessment. Existing scar classification systems are constrained by specific pathologies, physician-centric features, and inadequately account for emerging technologies. This study refrains from proposing yet another classification system and instead revisits the foundational language of scar morphology through a theme analysis of primary patient complaints. METHOD: Data encompassing five years of a high-volume scar practice was analysed. Primary complaints were aggregated into collective descriptors and further organized into theme domains. The resulting hierarchical map of presenting complaints revealed five key domains: Loss of Function, Contour, Texture, Vector, and Colour Presenting complaints were codified into 42 items, which were then categorised into 14 collective descriptor terms. The latter were in turn organised into five overarching themes. RESULT: Loss of Function, accounting for 10% of primary concerns, signifies reduced function attributed solely to the scar. Contour, encompassing 41% of concerns, pertains to scar height, shape, and depth. Texture, representing 12% of concerns, denotes tactile variations such as hardness, roughness, and moisture. Vector, comprising 13% of concerns, refers to scar tissue tension and associated distortions. Colour, the concern in 24% of cases, encompasses variations in pigmentation, vascularity, and exogenous pigments. DISCUSSION: Standardized terminology enhances patient care, communication, and research. This study underscores the fundamental question of "what bothers the patient," reviving a patient-centred approach to scar management. By prioritizing themes based on patient complaints, this study innovatively integrates function, aesthetics, and patient experience. In conclusion, this study pioneers a paradigm shift in scar management by presenting a patient-driven theme framework that offers a common language for healthcare professionals and patients. Embracing this language harmonizes scar treatment, fosters innovation, and transforms scars from silent reminders into stories of resilience and healing.

Recent Progress of Advanced Functional Separators in Lithium Metal Batteries.

As a representative in the post-lithium-ion batteries (LIBs) landscape, lithium metal batteries (LMBs) exhibit high-energy densities but suffer from low coulombic efficiencies and short cycling lifetimes due to dendrite formation and complex side reactions. Separator modification holds the most promise in overcoming these challenges because it utilizes the original elements of LMBs. In this review, separators designed to address critical issues in LMBs that are fatal to their destiny according to the target electrodes are focused on. On the lithium anode side, functional separators reduce dendrite propagation with a conductive lithiophilic layer and a uniform Li-ion channel or form a stable solid electrolyte interphase layer through the continuous release of active agents. The classification of functional separators solving the degradation stemming from the cathodes, which has often been overlooked, is summarized. Structural deterioration and the resulting leakage from cathode materials are suppressed by acidic impurity scavenging, transition metal ion capture, and polysulfide shuttle effect inhibition from functional separators. Furthermore, flame-retardant separators for preventing LMB safety issues and multifunctional separators are discussed. Further expansion of functional separators can be effectively utilized in other types of batteries, indicating that intensive and extensive research on functional separators is expected to continue in LIBs.

Polylactic acid-based plastic activated NiAl2O4 nanoparticles as highly active positive electrode materials for energy storage supercapacitor.

A simple, low-cost, and environmentally benign process for synthesizing nanostructured NiO/NiAl2O4 on multiple kinds of carbon nanostructures (CNS) is presented. This method develops polylactic acid (PLA) based waste plastic materials for the producing CNS. These composites (NiO@NiAl2O4/CNS) were examined as potential electrodes in supercapacitors (SC) as they exhibit good charge/discharge reversibility and provide adequate specific capacitance values with a maximum being 1984 F/g at 0.5 A g-1. It is noteworthy that the cycling stability of this sample at 10 A g-1 maintained 101.7% of its initial capacity even after 5000 GCD cycles. An asymmetric supercapacitor (ASC) was built and analyzed, with NiO@NiAl2O4/CNS serving as the cathode and activated carbon serving as the anode of the device. The concluded device has an energy density of 58 Wh kg-1 with a power density of 986 W kg-1 and a SCs of 216.5 F/g. The results showed that the materials mentioned are a great option to use as electrode materials in applications involving the storage of energy.

Zinc Powder Anodes for Rechargeable Aqueous Zinc-Based Batteries.

Aqueous rechargeable zinc-based batteries hold great promise for energy storage applications, with most research utilizing zinc foils as the anode. Conversely, the high tunability of zinc powder (Zn-P) makes it an ideal choice for zinc-based batteries, seamlessly integrating with current battery production technologies. However, challenges such as contact loss, dendrite formation, and a high tendency for corrosion significantly hamper the performance enhancement of Zn-P anodes. This review provides an overview of strategies adopted from various perspectives, including zinc powder optimization, electrode engineering, and electrolyte modification, to address these issues. Additionally, it explores the limitations of existing research and offers valuable insights into potential future directions for further advancements in Zn-P anodes.

Unlocking Double Redox Reaction of Metal-Organic Framework for Aqueous Zinc-Ion Battery.

Metal-organic frameworks (MOFs) show wide application as the cathode of aqueous zinc-ion batteries (AZIBs) in the future owning to their high porosity, diverse structures, abundant species, and controllable morphology. However, the low energy density and poor cycling stability hinder the feasibility in practical application. Herein, an innovative strategy of organic/inorganic double electroactive sites is proposed and demonstrated to obtain extra capacity and enhance the energy density in a manganese-based metal-organic framework (Mn-MOF-74). Simultaneously, its energy storage mechanism is systematically investigated. Moreover, profiting from the coordination effect, the Mn-MOF-74 features with stable structure in ZnSO4 electrolyte. Therefore, the Zn/Mn-MOF-74 batteries exhibit a high energy density and superior cycling stability. This work aids in the future development of MOFs in AZIBs.

Super-Stretchable and High-Energy Micro-Pseudocapacitors Based on MXene Embedded Ag Nanoparticles.

The advancement of aqueous micro-supercapacitors offers an enticing prospect for a broad spectrum of applications, spanning from wearable electronics to micro-robotics and sensors. Unfortunately, conventional micro-supercapacitors are characterized by low capacity and slopy voltage profiles, limiting their energy density capabilities. To enhance the performance of these devices, the use of 2D MXene-based compounds has recently been proposed. Apart from their capacitive contributions, these structures can be loaded with redox-active nanowires which increase their energy density and stabilize their operation voltage. However, introducing rigid nanowires into MXene films typically leads to a significant decline in their mechanical properties, particularly in terms of flexibility. To overcome this issue, super stretchable micro-pseudocapacitor electrodes composed of MXene nanosheets and in situ reconstructed Ag nanoparticles (Ag-NP-MXene) are herein demonstrated, delivering high energy density, stable operation voltage of ≈1 V, and fast charging capabilities. Careful experimental analysis and theoretical simulations of the charging mechanism of the Ag-NP-MXene electrodes reveal a dual nature charge storage mechanism involving ad(de)sorption of ions and conversion reaction of Ag nanoparticles. The superior mechanical properties of synthesized films obtained through in situ construction of Ag-NP-MXene structure show an ultra stretchability, allowing the devices to provide stable voltage and energy output even at 100% elongation.

Theoretical exploration of the stabilities and detonation parameters of nitro-substituted 1H-benzotriazole.

CONTEXT: The nitro group was introduced into the nitrogen heterocycle of 1H-benzotriazole to design a total of 31 derivatives. To estimate the thermal stability of these derivatives, the heat of formation (HOF) is calculated based on the isodesmic reaction. The bond dissociation energy (BDE) was also predicted based on the homolytic reaction to further evaluate the dynamic stability. To evaluate the possibility of utilizing as high energy density compounds (HEDCs), the detonation parameters including the detonation pressure (P), detonation velocity (D), and explosive heat (Q) are predicted by taking advantage of the Kamlet-Jacobs empirical equation. To measure the sensitivity to impact, both the characteristic height (H50) and free space in crystal (∆V) are considered in this paper. Based on our calculations, D-series and E are found to be the candidates for HEDCs. METHODS: The Gaussian 09 software package was used in this paper. The B3PW91 hybrid function with the 6-311 + G(d,p) basis set was chosen to perform the structural optimization, frequency analysis, heat of formation, and bond dissociation energy. The detonation parameters were calculated following the Kamlet-Jacobs equation.

Luminescence Properties of ZrO2: Ti Ceramics Irradiated with Electrons and High-Energy Xe Ions.

Samples of ZrO2 ceramics with different concentrations of impurity titanium ions were synthesized by mixing zirconium and titanium oxide powders in different mass ratios. The X-ray diffraction analysis was used to determine the phase composition, lattice parameters, and crystallite size of the ceramics with varying dopant concentrations. Upon irradiation of the samples with 220 MeV Xe ions to a fluence of 1010 ions/cm2, a decrease in the intensity of the pulsed cathodoluminescence band at 2.5 eV was observed. Additionally, ion irradiation resulted in the emergence of a new thermoluminescence peak at 450-650 K attributed to radiation-induced traps of charge carriers. Further analysis revealed that the thermoluminescence curves of samples irradiated with electrons and ions comprise a superposition of several elementary peaks. Notably, a complex non-monotonic dependence of cathodo- and thermoluminescence intensity on titanium concentration was observed, suggesting the influence of concentration quenching and the presence of tunneling transitions.